Quest Engineering QM 1000P User Manual - page 4
QM
1000P
User Manual
User Manual
Q Motion Series
QM 1000P
2
WARNING
When the Unit is in Use
• Should the following irregularity be found
during use, immediately switch off the
power, disconnect the power supply plug
from the AC outlet and contact your nearest
Quest dealer . Make no further attempt to
operate the unit in this condition as this
may cause fire or electric shock .
• If you detect smoke or a strange smell
coming from the unit .
• If water or any metallic object gets into
the unit
• If protect lights are illuminated or the clip
lights stay on for more than one second
• If the power supply cord is damaged
(exposure of the core, disconnection, etc .)
• To prevent a fire or electric shock, never
open the unit case as there are high voltage
components inside the unit . Refer all
servicing to your nearest Quest dealer .
• Do not place cups, bowls, or other
containers of liquid or metallic objects on
top of the unit . If they accidentally spill into
the unit, this may cause a fire or electric
shock .
• Do not insert nor drop metallic objects or
flammable materials in the ventilation slots
of the unit’s cover, as this may result in fire
or electric shock .
When Installing the Unit
• Do not expose the unit to rain or an
environment where it may be splashed by
water or other liquids, as doing so may
result in fire or electric shock .
• Use the unit only with the voltage
specified on the unit . Using a voltage
higher than that which is specified may
result in fire or electric shock .
• Do not cut, kink, otherwise damage nor modify
the power supply cord . In addition, avoid using
the power cord in close proximity to heaters,
and never place heavy objects -- including the
unit itself -- on the power cord, as doing so may
result in fire or electric shock .
• Be sure to replace the unit’s terminal cover
after connection completion . Because
high voltage is applied to the speaker
terminals, never touch these terminals to
avoid electric shock .
• Install in a well ventilated equipment rack
away from heat sources .