Quest Engineering QM 1000P User Manual - page 5
QM
1000P
User Manual
User Manual
Q Motion Series
QM 1000P
3
CAUTION
An all-pole mains switch with a contact separation of at least 3mm in each pole shall be
incorporated in the electrical installation of the building .
When Installing the Unit
• Never plug in nor remove the power supply
plug with wet hands, as doing so may cause
electric shock .
• When unplugging the power supply cord, be
sure to grasp the power supply plug; never
pull on the cord itself . Operating the unit
with a damaged power supply cord may
cause a fire or electric shock .
• When moving the unit, be sure to remove
its power supply cord from the wall outlet .
Moving the unit with the power cord
connected to the outlet may cause damage
to the power cord, resulting in fire or electric
shock . When removing the power cord, be
sure to hold its plug to pull .
• Do not block the ventilation slots front intake
or rear hot air outlet . Doing so may cause
heat to build up inside the unit and result in
fire .
• Avoid installing the unit in humid or dusty
locations, in locations exposed to direct
sunlight, near heaters, or in locations
generating sooty smoke or steam as doing
otherwise may result in fire or electric shock .
When the Unit is in Use
• Do not place heavy objects on the unit
as this may cause it to fall or break which
may result in personal injury and/or
property damage . In addition, the object
itself may fall off and cause injury and/or
damage .
• Make sure that the volume control is set
to minimum position before the power is
switched on . The possibility of a loud noise
produced at high volume when power is
switched on can impair hearing .
• Do not operate the unit for an extended period
of time then the sound is distorting . This is an
indication of a malfunction, which in turn will
generate heat and result in a fire .
• Contact your dealer in regards to how to best
clean the unit . If dust is allowed to accumulate
in the unit over a long period of time, a fire or
damage to the unit may result .
• If dust accumulates on the power supply plug
or in the wall AC outlet, a fire may result . Please
clean the connection periodically . In addition,
insert the plug into the wall outlet securely .
• Switch off the power, and unplug the power
supply plug from the AC outlet for safety
purposes when cleaning or leaving the unit
unused for 10 days or more .
Doing otherwise may result in fire or electric
shock .