Quickie Attitude Owner's Manual - page 17
MK-100393 Rev. A
17
Q UI C KI E A T T I T UD E
WARNING
The owner of this bike is responsible for makiing sure that it has been setup and adjusted by a trained
service professional. Service and/or adjustments should only be done by a professional. Always use parts
and/or accessories that have been recommended and approved by Sunrise Medical when servicing this
bike.
A. DEALER SERVICE INTRODUCTION
1. At least once per year, this bike should have a complete inspection, safety check, and regular serv-
ice made by an authorized dealer.
2. If you have discovered a worn, bent, or damaged part, repair or replace them with recommended
parts before returning this bike to service.
3. All major maintenance and repair work should be done by an authorized dealer, or local bike shop
where applicable.
B. CRITICAL MAINTENANCE TIPS
1. Paint Finish
a. Clean the painted surfaces with mild soap or detergent.
b. Protect the paint with a coat of non-abrasive auto wax.
2. Axles and Moving Parts
a. Clean around axles and moving parts with a slightly damp (not wet) cloth.
b. Wipe off or blow away any fluff, dust or dirt on axles or moving parts.
c. Except for the chain, DO NOT USE 3 in 1 oil, or WD-40 ® for lubrication. Only use Teflon based
Lubricant when working on this bike.
D. SIMPLE DISC BRAKE ADJUSTMENT
If the brakes are either too loose (braking is not immediate) or if the brake pads rub the disc brake while
riding, the brakes will need to be adjusted.
1. Adjusting the brake cable
After each use the brake cables may stretch, causing the braking action to be limited. To tight-
en up the cable:
a. Turn the cable adjustment knob(A) to the right 1/4 turn and check the engagement of the brakes.
b. Repeat this action 1/4 turn at a time until the brake pads are fully engaged but do not rub on the
disc after the brake handle is released.
23
IX. DEALER SERVICE AND ADJUSTMENT
23
A
1. Torque settings:
A torque setting is the optimum tightening which should be made on a particular fastener. It is important
to use proper torque settings where specified. When not specified, torque settings should be 62 in-lbs.
2. Dealer Service and Adjustment Reference materials:
For help with the following adjustments go to www.sunrisemedical.com for parts manuals, instruction
sheets, and instructional videos that will aid in the repair of the Attitude bike.
You may also refer to the following documents:
Additional information on individual bike components may be available on the component manufacturer's
website. See the manufacturer's brand name printed on the individual component.
C. CLEANING
The brakes are a critical component to the performance of your bike. If you have not been trained in
proper bicycle maintenance, or are not familiar with the components on this product, all maintenance
should be performed by a professional bike shop. Improper adjustments to the brake system may
cause damage to the mechanism and affect the safety of the bike.