QuickLink SCADA PRO 900 User Manual - Scada Pro 900 Data Radio
SCADA PRO 900 WIRELESS DATA MODEM
___________________________________________________________________________________________
Revision A
USER’S GUIDE
15
SCADA PRO 900 Data Radio
S
PECIFICATIONS
Overall
Frequency ...............................................................................................902-928 MHz
Frequency Control................................................................................ PLL Synthesizer
Transport ......................................................... Transparent, Point-to-Point Guaranteed
Data Interface................................................... Asynchronous Serial, RS-232 or RS-485
Hopping Channels ................................................................. 25(200mW) or 50(1 watt)
Configuration ............................................... Windows™ Application using PC Serial Port
Duty Cycle ........................................................................ 100% receive, 50% transmit
Data Interface Rate............................................ 2400,4800,9600,19.2k,56k bps (N,8,1)
Temperature...........................................................................................-30 to +70
°C
Range .............................................................. up to 10 miles depending on conditions
Data Encoding ................................................................................ Proprietary Method
Receiver Sensitivity ............................................................................ -101 dBm usable
Modulation........................................................................................... Direct FM (FSK)
RF Data Rate ...................................................................................................50 kbps
Data Flow Control ......................................................................... Hardware using CTS
Transmitter Output........................................................................................... 200mW
Error Detection ............................................................................................16 bit CRC
Power Requirements
Input Voltage........................................................................8 – 14 VDC or 9 – 28 VDC
Input Current 200mW .................................................................. 70 mA Receive Mode
250 mA Transmit Mode
Input Current 1W..............................................................115mA Receive Mode @ 12V
75mA Receive Mode @ 24V
910mA Transmit Mode @ 24V
450mA Transmit Mode @ 24V
Regulatory
United States (FCC)..................................................................... CFR 15.247 Approved
Canada (IC) .....................................................................................RSS-210 Approved
Mechanical
Size............................................................................................. 6.25” x 3.5” x 2.375”
Antenna Connector................................................................................... Reverse SMA