Quidway V100R006C00 Configuration Manual - Nap Configuration
2
NAP Configuration
About This Chapter
This chapter describes how to configure the Neighbor Access Protocol (NAP) on the S6700.
NAP is a Huawei proprietary protocol that implements remote configuration and deployment of
unconfigured devices. You can log in to an unconfigured device from a directly connected device
and configure the unconfigured device remotely through NAP.
2.2 Configuring NAP-based Remote Deployment
Using NAP, you can remotely log in to devices with empty configurations to implement remote
This section provides upgrade and maintenance examples together with the configuration
flowchart. The configuration examples explain networking requirements, configuration notes,
Quidway S6700 Series Ethernet Switches
Configuration Guide - Device Management
2 NAP Configuration
Issue 02 (2011-10-01)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13