Quilter 101 Mini Reverb User Manual - page 2
IMPORTANT SAFETY INSTRUCTIONS
1 – Read and keep these instructions.
2 – Heed all warnings and follow all instructions.
3 – WARNING: To prevent fire or electric shock, do not expose this equipment to rain or
moisture. Do not use this apparatus near water.
4 – Clean only with a dry cloth.
5 – WARNING: To prevent excessive temperature rise, operate product only in free air with
unrestricted ventilation. Do not install in confined spaces or near heat sources such as radia-
tors, heat registers, stoves, or other apparatus that produce heat.
6 – Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding plug has two blades and a ground-
ing prong. The wide blade or third prong are provided for your safety. If the provided plug does
not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
7– Protect the power cord from being walked on or pinched, particularly plugs, convenience
receptacles, and the point where they exit from the apparatus.
8 – Unplug the apparatus during lightning storms or when unused for long periods of time.
9 – The appliance coupler (or attachment plug) is the mains disconnect device and should
remain readily accessible when amplifier is in use.
10 – Refer all servicing to qualified service personnel. Servicing is required when the appara-
tus has been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
11 – This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
12 – Changes or modifications made by the user that are not expressly approved by the man-
ufacturer may void your authority to operate the amplifier.
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulat-
ed "dangerous" voltage within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to
humans.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and mainte-
nance (servicing) instructions in this manual.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER. NO USER–SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSON-
NEL.
WARNING: To prevent fire or electric shock, do not expose this
equipment to rain or moisture.
Explanation of symbols
2