Quilter MicroPro 200 MP200 HEAD Owner's Manual - Footswitch Jack.
Footswitch Jack.
The foot controller connects with the supplied cable.
Both jacks on the foot controller are wired identically, so
you can plug into either one. A standard network cable
with RJ-45 connectors may be used as an emergency
replacement or if you need a longer cable.
Direct Output
The isolated direct output allows you to route the output
sound of the amp to a mixing board or external powered
loudspeakers without using a microphone. The signal level
is compatible with mic inputs, and is padded down from
the actual signal across the speaker, to preserve as much of
the tone quality as possible.
A high frequency rolloff is included to prevent high frequency system
instability, and produces the same tone quality through full-range
speakers as the internal single-cone driver.
Caring For Your Amplifier
Clean the outer surfaces with a clean, damp cloth or vacuum with a soft
brush. Never use any abrasives, harsh cleaners or solvents.
The MicroPro 200 amplifier is manufactured with high quality
components using modern industrial processes that greatly reduce
production defects. Each amplifier goes through an intensive testing
process before it leaves the factory ensuring that your amplifiers will give
you years of flawless service. There are no user-serviceable parts inside
the amplifier. Any repairs should be performed by a trained service
professional.
Always use the amplifier in a well-ventilated environment and protect
from external heat sources such as furnaces or direct sunlight.
Prolonged high-volume playing causes heat buildup in the speaker
which reduces its working lifetime. If you find it necessary to consistently
use the amp at full volume, we recommend using an extension speaker
to prolong speaker life and improve sound coverage.
16