Quilter MicroPro 200 MP200 HEAD Owner's Manual - Explanation Of Symbols
IMPORTANT SAFETY INSTRUCTIONS
1 – Read and keep these instructions.
2 – Heed all warnings and follow all instructions.
3 – WARNING: To prevent fire or electric shock, do not expose this equipment to rain or
moisture. Do not use this apparatus near water.
4 – Clean only with a dry cloth.
5 – Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
6 – Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two blades and a
grounding prong. The wide blade or third prong are provided for your safety. If the
provided plug does not fit your outlet, consult an electrician for the replacement of the
obsolete outlet.
7– Protect the power cord from being walked on or pinched, particularly plugs,
convenience receptacles, and the point where they exit from the apparatus.
8 – Unplug the apparatus during lightning storms or when unused for long periods of time.
9 – The appliance coupler (or attachment plug) is the mains disconnect device and should
remain readily accessible when amplifier is in use.
10 – Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
11
– This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
12 – Changes or modifications made by the user that are not expressly approved by the
manufacturer may void your authority to operate the amplifier.
Explanation of symbols
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated "dangerous"
voltage within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in this manual.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER. NO USER–SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
WARNING: To prevent fire or electric shock, do not expose this equipment
to rain or moisture.