Summary of Pro Block 200
Page 2
Pg. 2 limited transferable warranty important: please read this document completely. It contains important information about your rights and obligations, as well as limitations and exclusions that may or may not apply to you. By accepting delivery of the product(s), you agree to be bound by and acce...
Page 3: Input
Pg. 3 forward by patrick quilter the pro block 200 personal power amplifier provides an ideal link between any good loudspeaker and the musician’s instrument or electronic tone source (pedal board, digital processor, or keyboard). Despite its small size and streamlined control panel, this little pow...
Page 4
Pg. 4 front panel: input: accepts standard guitar or any other signal. Fx send: sends post overdrive signal to external effects units at approx. 1v peak. May also be used as a line output. Return: returns effects signals to the master and into the power amplifier. Gain: the left half of the range is...
Page 5
Pg. 5 rear panel – ac power, speakers international power supply the pro block works with all known worldwide ac voltages (100-250v), which allows you to play just about anywhere on the planet. Locking iec power cord the power cord that comes with your amplifier is designed to lock into the ac inlet...
Page 6
Pg. 6 mounting the tone block: multiple holes are provided in the cover to enable the pro block to be mounted in a variety of situations. The rubber feet may be removed if desired; save the mounting screws for re-use to ensure proper fit and retention..
Page 7
Pg. 7 caring for your amplifier: clean the outer surfaces with a clean, damp cloth or vacuum with a soft brush. Never use any abrasives, harsh cleaners or solvents. The pro block amplifier is manufactured with high quality components using modern industrial processes that greatly reduce production d...
Page 8
Pg. 8 electronic performance power output: 0 to 200 watts, 4-8 ohms ac power req.: 100-240vac, 50-60hz, 250w input connections: 1/4" mono direct out: xlr-m, 300mv full scale, balanced, ground lifted 10k min. Speaker 1 output: 8 ohms, 200 w minimum recommended rating speaker 2 output: 4 ohms, 200 w m...
Page 9
Pg. 9 background hum • ensure the guitar plug is fully inserted. • try using a different guitar cable. Make sure it is properly shielded. • any ac powered sources or effects should be plugged into the same receptacle as the amplifier to help avoid ground loops. If the hum goes away when you turn dow...
Page 10
Pg. 10 limited transferable warranty: important: please read this document completely. It contains important information about your rights and obligations, as well as limitations and exclusions that may or may not apply to you. By accepting delivery of the product(s), you agree to be bound by and ac...
Page 11: Quilter Laboratories, Llc
Pg. 11 factory service: to return an amplifier to quilter labs for service under the warranty policy, please visit www.Quilterlabs.Com and fill out the return request form. If you do not have access to the website, you may send a request by letter to quilter labs at 1700 sunflower, suite a, costa me...
Page 12
Pg. 12.