Quilter Pro Block 200 Owner's Manual - Input
Pg. 3
Forward by Patrick Quilter
The Pro Block 200 personal power amplifier provides an ideal link
between any good loudspeaker and the musician’s instrument or
electronic tone source (pedal board, digital processor, or keyboard).
Despite its small size and streamlined control panel, this little
powerhouse can replace almost any stage amp ever made.
The
INPUT
accepts normal guitar cables. The
GAIN
control ranges
from line level to overdrive. The
LIMITER
control provides separate
control of sustain, with or without overdrive distortion. A single
TRI-Q
control blends three distinct voices, providing far more tone shaping
than an ordinary “tone” control. The
REVERB
is clean and lively, and
the
HI-CUT
controls the overall bandwidth. The
MASTER
adjusts
the amplifier’s warm, musical power output from 0 to a full 200 watts,
offering clean headroom and/or rich overdrive at will. An
EFFECTS
LOOP
completes the front panel features, and the rear provides twin
SPEAKER
outputs and a
DIRECT OUT
for easy interface to stage
or studio audio systems. A rack mount kit is also available, mounting
one or two Pro Blocks in a 2RU rack adaptor.
Please consult this manual to obtain the best results. Quilter Labs
uses the latest power technology to maximize warmth and dynamics
without the weight and drawbacks of classic tube technology. Every
component and circuit is selected solely on the basis of superior
results. Where advanced design or premium components significantly
boost performance, we have made the investment. Costs are kept
as low as possible using a well-managed high volume production
process.
The result is a serious professional tool with performance that meets
or beats handmade amps costing and weighing several times as
much.
We hope you enjoy your new amplifier. May it deliver many years of
flawless service and provide a source of inspiration and creativity.
Carton Contents
1 Quilter Pro Block Amplifier
1 IEC AC Power Cord
1 Owner’s Manual