Quilter Steeliare Owner's Manual - Caring For Your Amplifier
10
Caring For Your Amplifier
Clean the outer surfaces with a clean, damp cloth or vacuum with a soft
brush. Never use any abrasives, harsh cleaners or solvents.
The Steelaire amplifier is manufactured with high quality components
using modern industrial processes that greatly reduce production
defects. Each amplifier goes through an intensive testing process before
it leaves the factory ensuring that your amplifiers will give you years of
flawless service. There are no user-serviceable parts inside the amplifier.
Any repairs should be performed by a trained service professional.
Always use the amplifier in a well-ventilated environment and protect
from external heat sources such as furnaces or direct sunlight.
Prolonged high-volume playing causes heat buildup in the speaker
which reduces its working lifetime. If you find it necessary to consistently
use the amp at full volume, we recommend using an extension speaker
to prolong speaker life and improve sound coverage.
Specifications
Amplifier Module Specifications
Power Output:
200 watts, 4-8 ohms
AC Power Req.:
100–240Vac, 50–60 Hz, 250 W
Input
Connections:
INSTR-1: ¼" mono
INSTR-2: ¼" mono
Input Impedance:
INSTR 1 or 2: 2M ohms
Effects Loop:
Output: ¼" mono, 1V FS (-10dB), 1K ohms
Input: ¼" mono, 50K ohms
Speaker 1 Output:
4 ohms, 200 W minimum rating
Speaker 2 Output:
4-8 ohms, 200 W minimum rating
Rack Mount Dims:
2RU, 7.75” (19.7cm) deep, 7.2 lbs (3.3Kg)
Cabinet and Speaker
Speaker:
Custom voiced 15” Eminence, neo magnet, 3” voice coil,
300W rating, in open-back cabinet
Cabinet
Dimensions:
(H x W x D)
Combo cabinet: 21 x 23 x 9 in (53.4 x 58.4 x 22.9 cm)
Rack Mount cabinet: 23 x 21 x 10.5 in (48.4 x 53.4 x 26.7cm)
Handle and feet add 0.75 in (2cm) top and bottom.
Weight:
35 lbs. (16 Kg)
Note: Power ratings are provided by the loudspeaker manufacturer and are only a
guideline when selecting a suitable speaker. Quilter Labs qualifies our speaker
selections using a lengthy full power test that ensures that the speaker can
withstand the maximum power output of our amplifiers
.