Quilter Steeliare Owner's Manual - International Power Supply
7
REAR PANEL – AC POWER, SPEAKERS
International Power Supply
The Steelaire can be used on all known worldwide AC voltages
(100-250V), which allows you to play just about anywhere on the planet.
Locking IEC Power Cord
The power cord that comes with your amplifier
is designed to lock into the AC inlet to reduce
the chance it will come unplugged during use.
Press the yellow button on the cord to release
it. Any normal 3-prong IEC cord may also be used with the amplifier.
Always ensure that the ground contact is intact on both the cord and
receptacle.
Speaker Outputs
The Steelaire comes with the internal speaker
plugged into the INT SPEAKER output. An
external 4-8 ohm speaker may be used in
place of the internal speaker by unplugging
thiscable and connecting the external
speaker.
To use two speaker cabinets simultaneously, connect a 4-8 ohm
extension speaker with a minimum of 200 watts continuous power
handling to the EXT SPEAKER output and a 4-8 ohm cabinet (or the
internal speaker) to the INT SPEAKER output. Circuitry adjusts the output
impedance to split the power between the two outputs.
CAUTION: the amplifier can deliver up to 300 watts peak, well beyond the
capacity of most single speakers. We recommend Quilter extension
cabinets with power tested speakers. Quilter Labs will not be liable for
damage to other speakers.