Summary of LK-T21
Page 1
User manual qprint fm.
Page 2
2 dear valued customer! On behalf of our proud company we wish to welcome you to the quorion family of fine business machines. We sincerely hope you will appreciate the many benefits of being associated with a distinguished product name that represents both quality and commitment to customer satisfa...
Page 3: Index
3 index 1. Safety precautions .................................................................................. 4 2. General information ................................................................................. 5 2.1 technical data ..............................................................
Page 4: 1. Safety Precautions
4 1. Safety precautions this section presents important information intended to ensure safe and effective use of the qprint fm. Please read this section carefully and store it in an accessible location. • be sure the voltage of your main power net corresponds to the input voltage printed on the rati...
Page 5: 2. General Information
5 2. General information 2.1 technical data technical data of printer: print principle: thermal printer model „lk-t21“ print width: 72mm paper width: 80mm print speed: 200mm/sec. Sheet feeder: drop in life time: 100km mcbf: 70 mill. Lines cutter: guillotine cutter max. Number o cuts: 1, 5 mills. Tec...
Page 6
6 2.2 components control panel: led’s to indicate printer status and paper feed key. Printer cover: open this cover to load or replace the paper roll. Cover open lever: pull down this lever to open the printer cover. Function keys: used to program and operate special fiscal functions. Power switch: ...
Page 7
7 2.3 control panel you can control the basic paper feeding operations of the printer with the button on the control panel. Press the feed button once to advance paper one line. If you hold down the feed button the paper will be feed continuously. The indicator lights help you to monitor the printer...
Page 8
8 power supply 1: +24v dc 2: gnd 3: nc cash drawer 1: gnd 2: drawer + 3: sensor 4: drawer - 5: nc 6: gnd rs232 ports 1 to 3 1: +5v dc (max. 0,5a) 2: rxd 3: txd 4: dtr 5: gnd 6: dsr 7: rts 8: cts lan 1: tx+ 2: tx- 3: rx+ 6: rx- usb device 1: vcc 2: usb n1 3: usb p1 4: gnd adapter cables from the qpri...
Page 9: 3. Getting Started
9 3. Getting started 3.1 unpacking your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. Printer user manual paper roll interface cables power supply place the qprint fm on a stable and even surface. Use it only within the operat...
Page 10
10 6. Pull out a small amount of paper as shown below. Then close the cover. 7. Tear off the paper as shown. 3.3 self test the self-test lets you know if your printer is operating properly. It checks the control circuits, printer mechanisms, print quality, rom version and dip switch settings. This t...
Page 11
11 4. Application for countries with fiscal law 4.1 topology 4.2 programming the firmware, default configuration, character set or grapfic logo of the qprint fm can be programmed with qflash, similarly to the qmp cash register series. It is necessary to start the boot-mode of qprint: - switching on ...
Page 12
12 4.4 operation with qprog use q driver-commands about the interface (see „q driver manual“) - use „opos“-driver of the pc (communicate with the q print about the if). - direct communication with the no-fiscal-cr (concerto, q touch, ..). All reports can be started about the „q prog“(see „q prog man...
Page 13
13 fm dump by z qprint fm starts the fm dump. In the external display the start-z-number appears, for instance: 0001 use the keys • f1 to select the last position (shift to right) and quit the menu • f2 to move the cursor to the left (blink) • f3 to move the cursor to the right (blink) • f4 to confi...
Page 14
14 test qprint qprint starts a special testing printout (all 5 s are printed 2 lines). ===================== ** check q_printer ** ===================== ** check q_printer ** the printout is stopped with pressing any of the keys f1..F4 or power off. 5. Information on the electromagnetic compatibilit...
Page 15
15 disposal of old electrical & electronic equipment (applicable in the european union and other european countries with separate collection systems) this symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to...