QUORION LK-T21 User Manual - 3. Getting Started
9
3. Getting started
3.1 Unpacking
Your printer box should include these items. If any items are damaged or missing, please contact
your dealer for assistance.
Printer
User manual
Paper roll
Interface cables
Power supply
Place the QPrint FM on a stable and even surface. Use it only within the operation temperature
range (see technical data) and protect it from splash and high air humidity.
The QPrint FM is delivered with an external power supply. First, please check if the specifications
printed on the label fit to your local power supply network. If so, connect the power pack to the
QPrint FM. The power connection of the printer is at the back beside the interfaces. Now connect
the power supply with the power network.
If desired, you can now connect the interface cables to PC, display and keyboard. They are all
connected to the connector panel on the back side of the printer as described in chapter 2.5.
Please make sure that the printer is turned off before connecting any cable.
3.2 Loading the paper roll
Please be sure only to use paper rolls that meet the specifications. Do not use paper rolls that
have the paper glued to the core because the printer cannot detect the paper end correctly.
1. Make sure that the printer is not receiving data. Otherwise data may be lost.
2. Open the paper roll cover by pulling down the cover-open button.
3. Remove the used paper roll core if there is one inside.
4. Insert new paper roll as shown below. Note the correct direction of the paper roll.