Qvis POESWITCH-4 Installation Manual - Product Introduction
PRODUCT INTRODUCTION
The 10/100Mbps unmanaged PoE switch can provide seamless
network connection, which can integrate 100Mbps and 10Mbps
fast Ethernet network capabilities. It can automatically detect and
identify whether the connected devices, such as IP cameras,
comply with the IEEE802.3af & IEEE802.3at standards and supply
power to them. Ideally used in the deployment of AP, IP cameras,
and IP-based network equipment because of its ability to provide
power and data connectivity simultaneously.
PoE stands for Power over Ethernet. It is a technology that allows a
network system to transmit electrical power, along with data to remote
devices (such as IP phones, wireless AP, IP cameras, etc.) over a
standard twisted-pair Ethernet cable (Rj45) within the network.
u
Provides up to 30W of power
u
Complies to the IEEE802.3at PoE standard and is backward
compatible
u
Power Safe: small amount of power is used where needed
u
Safe and reliable power to WLAN access points
u
Automatic detection and protection of non-standard Ethernet
terminals
u
Supports 10/100 base-T applications
u
Compact design means that it does not need a large amount of
space to be installed within the network.
u
Plug-and-Play installation - no configuration required
u
Internal power supply
u
Green power technology: Low power consumption
© Copyright QVIS ®. All documentation rights reserved.