Qvis POESWITCH-4 Installation Manual - page 3
Other manuals for POESWITCH-4:
Installation Manual
of
7
Finally lock the switch in the specific position.
1. Please do not place anything heavy on the switch.
2. Please make sure there is ventilation around the switch to
provide a good airflow.
3. Please make sure the power is off before unplugging the power
adapter.
Connect the power cord to the switch and then plug the other end to
the mains power supply. When the switch is powering up the LED
indicator lights will respond as follows:
1. The power LED indicator will light up
2. The PoE port lights will not light up after flashing momentarily,
which represents a resetting of the system.
© Copyright QVIS ®. All documentation rights reserved.