R For Rabbit Honey Bunny Instruction Manual - page 2
General Instructions
You have chosen one of the most innovative strollers. This
stroller is functional, versatile and comfortable. You will
increasingly discover how this stroller’s innovative design
provides everything you wish for in a stroller. We wish the
most joyous and comfortable ride for your baby.
Important:
Read the instructions carefully before you use the product
and preserve it for your future reference. Your child’s safety
may be affected if you do not follow these instructions.
This user guide is for the stroller model number Honey
bunny.
1. Our stroller complies with EN 1888:2012 certification
and the design of the stroller is patented.
2. For replacements, only use original parts that are
supplied or approved by manufacturer.
3. Use original accessories. The warranty does not cover
damage to the stroller caused by overloading incorrect
folding or the use of non-original accessories. The
warranty conditions are stated in this manual which
also provides further information.
4. This stroller is suitable for children from 0-4 years of
age. Maximum load bearing capacity of the stroller is
15 kgs.
5. The use of carry cot, which is combination with the
stroller, is recommended for baby aged 0-6 months.
The maximum load bearing capacity for the carry cot is
9kgs.
Safety:
1. The stroller is not a car seat. Use an approved car seat
when travelling with baby in the car.
2. Approved car seats can be readily fitted into the
stroller using specific stroller adapter.
3. Do not allow children to play with or near the stroller.
It can cause serious accidents.
4. The stroller is intended to carry one child only.
5. Secure your child with the 5 point harness belts
whenever the child is in the stroller.
6. Do not leave your child unattended .
7. Always use the wrist strap that is attached to the
handle bar.
8. Do not keep the baby in stroller when using the
escalator or climbing up or down the stairs.
9. The parking locks must be engaged when placing and
removing children.
10. Do not carry the stroller from the front bar attached to
the carry cot.
11. Do not stand on the axles between the wheels. This is
unsafe and could damage the stroller.
12. Keep the stroller away from open flames and other
heat sources, such as electrical or heaters etc…
Check what you have received:
Check the contents of the box against the list below. If
anything is missing, kindly contact your supplier.
The product comprises of the following parts:
1 chassis with handlebar, parking brake
1 swivel wheel
2 large wheels
1 frame, seat and carry cot fabric
1 under seat bag
1 seat with safety bag
1 seat with safety belts
1 sun canopy
Warning
Infants and young children may suffocate due to plastic
bags. Discard the plastic bags immediately. Keep the plastic
bags away from children, infants, cribs, beds, playpens or
carriages.
Step by Step User Guide
1. The stroller is easy to assemble. It is advisable to
repeat actions a couple of times when indicated.
2. The chassis is the main part of the stroller. The frame
fits onto the chassis and is the base for carrycot and
seat.
Basic steps
This section explains how to assemble the stroller. Each
basic step in the stroller’s assembly is explained separately
in the text boxes. It is advisable to practise the basic steps.
Chassis
The parts are attached to the chassis. The chassis comprises
of axle for the large wheels, axle for the swivel wheel with
holders, handlebar with frame bearers, parking brake and
wrist strap.
You also need the following for the assembly:
1 swivel wheel, 2 large wheels and frame.
Advice: Use the cardboard packaging as a mat during
assembly.
Step 1: Folding out chassis and
handlebar
a) Place the chassis with the 3
points on the floor.
b) Stand with the handlebar in
front of you.
c) Hold the handlebar lightly in
your hands. Do not push.
d) Release the 2 white buttons on
the inside of the handlebar
towards you and fix the
buttons after getting a proper
length of the handle bar.
e) Move the handlebar upwards
and away from you and let go
off the white buttons. You will
hear a “click” when the
handlebar is upright.