R For Rabbit Honey Bunny Instruction Manual - page 4
Removing the frame from the chassis
b) Place the frame in horizontal
position. Simultaneously press
the 2 round buttons on the
frame supports which will
release the frame.
c) Pick up the frame and remove
from the frame supports.
Note: The 2 round white buttons are
always used to remove the frame
with the carrycot or the seat on.
Turning the frame around
a) You can turn the frame around to use it as a seat or a
carry cot. To turn the frame,
remove the frame from the
chassis. While holding the
frame in horizontal position,
turn it around and place it
back on the chassis.
Note: Always fi and remove the
frame with the frame bearers
of the chassis in vertical position.
Assembling the carrycot:
The carrycot consists of the frame, the carrycot fabric,
touch fasteners and zppers to ensure that carrycot
hangs stable in the frame.
Step 6:Fixing the carrycot in
the chassis
a) Zipper the carrycot fabric up
as shown in picture to the
back of the frame. Place the
bumper onto the bumper
bearers till you hear a click.
b) Press the carrycot
downwards until you hear a
‘click’ on both sides. Now the
carrycot is attached to the
chassis.
Assembling the seat fabric to the
frame
a) Zipper the seat fabric up on
the frame as previous
carrycot picture. Turning the
frame so that its base is
facing you, attach the ends
of the stretch belts till you
hear a click and it is fixed
tightly.
b) Fix the seat with chassis
Note: Please assemble the seat fabric
cover with frame in advance. The
seat cannot be fixed with frame
before fabric cover assembly.
Using the seat safety belts:
Step 1: Using safety belts
a) Apply the brakes and place your
child in the stroller. Pull the crotch
belt forward between the child’s
leg. If the child slides down, first
pass the crotch belt through the
black loop on the seat pad.
b) Bring the waist belt over child’s
waist and attach it to the crotch
belt. Adjust the belts by pulling them lightly.
c) Drape the shoulder belts over the child’s shoulders
and attach them to the lap belts.
Warning: Ensure that you hear a click when fastening the
harness belts. Always use the crotch belt in combination
with the waist belt.
Assembling the sun canopy:
The sun canopy comprises of 2 clamps, 1
removable frame and fabric.
Step 1 Fitting the sun canopy
a) Fit the carrycot onto the chassis.
Pull the sun canopy around the
round edge of the frame. Attach 2
canopy clamps on the frame, right
beside the handles, you should hear
a click.
b) Pull out the sun canopy.
Warning: Never take out baby in stroller
without fitting the sun canopy.
Traveling and storage:
Step 1 : a) Remove the seat or carrycot
from the chassis.
Step 2 : b) Release the button on handlebar
and push the stroller. Press both the round
button to release the handlebar by pulling
it towards you. Release the brakes if
applied on the wheels. Remove the wheels
and store the stroller.
Maintenance:
Cleaning the fabric: The stroller’s fabric is
detachable and can be washed in washing
machine carefully.
Note when washing the
fabric, remind the following: -maximum
temperature 30"C.
-
Do not bleach
-
Do not iron
-
Do not dry clean
-
Do not tumble dry
The aerated
inlay can be
washed at
60"C.At this temperature, the inlay will
become totally clean. The aerated inlay is placed on top of the
thicker foam mattress and can be taken of by removing the
mattress caver. After washing the fabrics, ensure that all parts
are replaced in their original positions.th The aerated inlay
should be placed on top of the foam mattress. Do not use the
mattress without the aerated inlay.