1490mm ag4xxxx spectre soaring thermal dlg glider installation manual please read it carefully before installation. It would save you a lot of time! Specification: wingspan: 1490mm fuselage length: 1095mm net weight: ~300g wing area: 21dm sq. Wing load: 14.2 dm sq. Wing type: ag455ct-02f / ag46ct-02...
Step 1: tail wing installation 1. Taking the aircraft tail wing and the tail pipe with the accessories bag which contains wooden parts out from the box. The opening and holes for tail wings have been pre-opened. Please ensure the angles of the wings in straight. The angle can be fixed by slightly tr...
Step 2: fuselage installation 4. Rudder installation: using cutter to remove the rudder covering along the mounting slot and secure it to the pre- opened mounting slot of the tail pipe with 502 glue and provided screws. 2. Using shrink tube covers one end of the push rod tube and secures it with 502...
4. Now, putting the tail rod pipe together with the fuselage in correct angle. Insert the wires from the servo end to the tail as above pictures. Using shrink tube covers another end of the push rod tube toward to the tail wing and glues it to the wooden tail wing mount. 6. And then glue the servo h...
1. Firstly, cutting off excessive covering along the corner of the wing with cutter. 2. Removing the covering on the ailerons servo mounts which is located in between the second and third section of the main wing. 3. Joining the main wing: take the 5mm carbon fiber rod out from the accessories bag a...
5. Installing main wing servos: glue the servos to the servo carbines with ab glue and pull the servo wires out thru the wing. (like the pictures above.) 6. Installing discus handling rod: one of the corners of the wing has been strengthen with carbon fiber cloth. You only need to insert the rod thr...
