Rac RAC02 GPS User Manual - page 5
Setting the Time & Date
The CarCam has a Time & Date function which can be embedded onto all video footage
recorded for easy reference. To ensure the Time & Date is correct, adjust as follows:-
1. Switch on the CarCam by pressing and holding the button for a few seconds.
2. If the Car Cam is recording, press the Rec / Stop button to stop the recording.
3. Press the Menu button twice to enter the Setup Menu.
4. Press the button to select Date / Time then press OK.
5. Use the OK button to scroll through the Year, Month, Date, Hour, Minute & Second
options and the use the and buttons to adjust each option.
6. When the Time and Date is set correctly, press the Menu button to exit the menu.
GPS Function
The RAC02 GPS CarCam is equipped with a GPS module that allows you to record your
exact co-ordinates and speed and embed this information onto the recorded video. The
location information is displayed as Longitude and Latitude in Decimal Degrees using
the World Geodetic System 84 (WGS 84) datum.
Please note:
• The CarCam may need up to two minutes to initially lock onto the GPS signal.
• The GPS signal may be lost when driving through tunnels or covered spaces.
• When the GPS cable is connected, the satellite icon is displayed. Once the GPS signal
is locked, the satellite icon with 3 bars is displayed.
• GPS position and speed data is not displayed on the CarCam LCD display but
embedded in the video for reference during playback.