Racelogic VBOX User Manual - Trackmaps And Lap-Timing
VIDEO VBOX MANUAL
Page | 7
20 October 2010
6. The best way of alinging the camera is to use the optional Racelogic
Preview monitor, which is plugged into AVOUT
Alternatively you can use a Laptop connected via USB to get a live view
(...more page 27)
7. Take the car outside and wait for the Green GPS LED to illuminate
8. Insert the SD card and you are now ready to drive, Video VBOX will start
to record Video automatically over 2.5kmh.
9. The Blue LED will illuminate when recording, and when you come
to a stop, it will flash as the file is closed.
IMPORTANT
- NEVER remove the SD card when this light is on or
flashing – you will lose video. If you have come to a stop, but the
Blue LED is on, press the REC button to stop the video before
removing the card.
Trackmaps and Lap-timing
To have lap-timing information or a circuit map shown on the video, the default internal ‘Scene’ needs to be modified.
To do this, you can use the Video VBOX Setup software, see separate manual for more details.
Notes on using USB
Always use the Supplied USB Cable
When connecting the Video VBOX to your computer, make sure you are using the USB cable supplied.
Some ‘standard’ USB leads do not have a full length USB connector and will disable communication between your PC
and the Video VBOX LITE.
Mobile Phone Software
Ensure that you shut down any mobile phone software running on your computer before connecting. We are aware of
conflicts which can arise when using this kind of software.