Radial Engineering Phazer Owner's Manual - page 15
13
Radial Phazer Specifi cations*
Circuit:
Class-A, 100% discrete components
Frequency response: 20Hz to 20kHz +/- 0.5dB
THD:
0.01 % from 20Hz to 20kHz
¼” Phone I/O:
TRS +4dB balanced
TIP: hot (+)
RING: cold (-);
SLEEVE: ground
TS -10dB unbalanced
TIP: hot (+);
SLEEVE: ground
XLR I/O:
+4dB balanced,
PIN-1: ground
PIN-2: hot (+) AES standard
PIN-3: cold (-)
Input impedance:
10K Ohm
Output impedance:
600 Ohm balanced,
1K Ohm unbalanced
Ground Lift:
Lifts pin-1 on the XLR output
Phase Shift:
0º to 180º degree control
Invert switch on: 181º to 360º
Low Pass Filter:
Variable from 300Hz to 3.8KHz
and from 3KHz to 38KHz
Bypass:
True-bypass with sealed gold relay
Construction:
14 gauge steel chassis and outer shell.
Baked enamel fi nish
Size:
5.8”w x 3.8”d x 1.8”h
(147mm x 96.5mm x 46mm)
Weight:
1.75 lb (0.82kg)
Warranty:
Radial 3-year, transferable
Power Supplies
Output Voltage:
15VDC (400mA), center pole positive
Input Voltage:
Part # R800 9407 00 120 volt - USA, Canada, Taiwan
Part # R800 9407 01 230 volt - Continental Europe
Part # R800 9407 02 230 volt - United Kingdom
Part # R800 9407 03 100 volt - Japan
Part # R800 9407 04 240 volt - Australia
* Subject to change without notice.
Radial Engineering
Phazer & Phazer-Bank
True to the Music