Radiancy Kyroback User Manual - page 15
13
Technical Specifications
Treatment
Time
10 minutes
Classification
Internally Powered
equipment, Type BF
Mode of
Operation
Continuous
Transport and
Storage
Conditions
Temperature: -25° C to 70°C
Humidity: 0-93% rH
electrical
requirements
9-12Vdc, 3A Max from an AC/DC adaptor In:
100-240Vac, 50/60Hz, 71-99VA, 0.9A
Operating
Conditions
Temperature
Humidity:
15%-93% rH
Atmospheric
pressure:
700 hPa to 1060 hPa.
Label
explanation
Located at the bottom of the device.
Indicates the need to consult instructions
for use.
Manufacturer
Indicates the Authorized representative in the
european Community
Indicates the temperature limitation.
Degree of protection against electric shock:
Type BF applied part
Ce mark represents the compliance to the
european Low Voltage Directive 2006/95/eC
and the electromagnetic Compatibility
Directive 2004/108/eC.
Protect the environment by not disposing of this
product with household waste (2002/96/eC).
Check your local authority for recycling advice
and facilities (europe only).
Catalogue number: Indicates the
manufacturer›s catalogue number so that the
device can be identified.
Serial number: Indicates he manufacturer›s
serial number so that a specific device can be
identified.
Technical Specifications
Weight: 3.15 kg
Physical Dimensions:
12 x 45 x 39 cm (w/d/h)
Product Labels & Symbols
This section describes the labels
affixed to the Kyrobak and
found in the user manual. It is
recommended that users review
the meaning of these labels for
everyday usage, and in case any
details are needed for service.
The table below briefly reviews
a number of the internationally
recognized symbols that are
found on the Kyrobak main Unit
and its external package.
Label
explanation
The package may be recycled.
IP21
IP21 according to IeC60529, Degrees of
Protection Provided by enclosures (IP Code).
40° C
5° C