Radiancy Kyroback User Manual - page 16
Manufacturer's declaration for electromagnetic
compatibility (eMC) for the Kyrobak according
to en 60601-1-2:2007
(Tables 1, 2, 4 and 6)
Table 1
Guidance and manufacturer's declaration – electromagnetic
emissions – Kyrobak
The Kyrobak is intended for use in the electromagnetic
environment specified below; The customer or the user of the
Kyrobak should assure that it is used in such an environment.
emissions test Compliance
electromagnetic environment
- guidance
rF emissions
CISPr 11
Group 1
The Kyrobak uses rF energy
only for its internal function.
Therefore, its rF emissions
are very low and are not likely
to cause any interference in
nearby electronic equipment.
rF emissions
CISPr 11
Class B
The Kyrobak is suitable for
use in all establishments,
including domestic
establishments and those
directly connected to the
public low-voltage power
supply network that supplies
buildings used for domestic
purposes.
Harmonic
emissions
IeC 61000-3-2
Class A
Voltage
fluctuations/
flicker
emissions
IeC 61000-3-3
Complies
14
Service Centers
You are allowed to perform only the servicing
listed in this User Manual.
radiancy is responsible for the effects on
safety, reliability and performance of the
equipment only if repairs are carried out by
radiancy authorized personnel.
Radiancy Inc.
40 ramland road South, Suite 200
Orangeburg, nY 10962, USA
+1 888.661.2220
+1 845.398.1647
Customer Support
888.998.4713
International Standards
electrical Safety:
Power Supply: double insulation
This appliance is not suitable for use in the
presence of flammable anesthetic mixture
with air or with Oxygen or nitrous Oxide. The
Quality Management System of radiancy
Ltd. complies with the Quality Management
Standard en ISO 13485. Kyrobak complies
with the following international standards and
directives: General requirements for Basic
Safety and essential Performance, 3rd ed.:
IeC60601-1:2005/en60601-1:2006
electromagnetic Compatibility:
IeC 60601-1-2:2007
electromagnetic Compatibility Kyrobak
requires special precautions regarding eMC
and needs to be installed and put into service
according to the eMC information provided in
this document.
FCC, Class B This equipment has been tested
and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the
FCC rules. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
manufacturer’s instruction manual, may cause
interference to radio communications. These
limits are designed to provide reasonable
protection against harmful interference
in a residential installation. notice: The
FCC regulations provide that changes or
modifications not expressly approved by
radiancy Inc. could void your authority to
operate this equipment.
Manufacturer
radiancy Israel Ltd. 5 Hanagar Street
4527708 Hod Hasharon Israel
European Representitive
Obelis s.a. Bd. Général Wahis 53
B-1030 Brussels, Belgium
Phone: 32.2.732.59.54
Fax: 32.2.732.60.03
e-mail: mail@obelis.net