Radiant DVMD14 User Manual - page 2
INTRODUCTION
This is a manual for the installation, setup, and configuration of the DVMD14. It contains step-by-step
instructions for connecting the DVMD14
in a system. It outlines a variety of set-up features.
Please also refer to
the XPORT User Manual to change the IP address and Local Port number for each DVMD14.
The minimum DVMD14 configuration must contain:
•
At least one DVMD14 with ISO type AC power cord
•
One CAT5 cable to a hub, router or crossover cable to PC NIC
•
ManagerNETxxx.exe, to set up and define masks.
•
A Windows based computer with 10/100 Base T NIC card and TCP/IP stack
•
A video camera which can be color, black & white, IR, or light-intensified
•
A CCTV monitor
•
At least two 75 ohm coaxial cables with BNC connectors
Any questions or comments regarding the DVMD14 Hardware User’s Manual should be sent to:
Radiant, Inc.
2395 Kenwood Drive
Boulder, CO 80305
Phone: 303-543-0440
FAX: 303-543-2126
E-mail:
lyle.powers@dvmd.com