2 x 50w dual output professional balance charger/discharger ac dc entire contents ©2016 radient rc. Part numbers rdna0396 duplex 2 x 50w lcd charger, us rdna0397 duplex 2 x 50w lcd charger, uk rdna0398 duplex 2 x 50w lcd charger, eu rdna0399 duplex 2 x 50w lcd charger, au for more information, pleas...
Contents warranty and service radient products are covered by the currently valid statutory warranty regulations. Radient and its authorised representatives accept no liability for loss, damage or costs which are caused by the incorrect or incompetent use of the product. For further information, ple...
Never attempt to charge or discharge the following types of battery: a battery pack which consists of different types of cells (including cells from different manufacturers). A battery that is already fully charged or only slightly discharged. Non-rechargeable batteries (explosion hazard). Batteries...
Duplex v1.0 by radient rc increase stop/battery type increase stop/battery type increase stop/battery type increase stop/battery type increase stop/battery type increase stop/battery type increase stop/battery type the opening display shows the charger name for two seconds and any software revision....
Specifications foreword operating voltage range: dc 11.0~18.0 volt ac 100v-240v circuit power: maximum charge power 50w x 2 maximum discharge power 5w x 2 charge current range: 0.1a-5.0a x 2 discharge current range: 0.1a-1.0a x 2 current drain for balancing li-po: max 250mah/cell nicd/nimh battery c...
8>measure input and output voltage a> measure vol i:12.1v o:19.87v in this program, the charger can measure dc voltage. The input voltage is shown on the left. Connect a battery to the appropriate charger outputs and its voltage will be displayed. Warnings and error information connected with incorr...
Special features safe the duplex charger uses advanced charging calculations which allows the safe charging of all batteries and minimizes the risk of user errors. Versatile the duplex will charge and discharge a wide variety of battery chemistries such as lipo, liion, life, nimh, nicd and pb. Simpl...
Safe the duplex charger uses advanced charging calculations which allows the safe charging of all batteries and minimizes the risk of user errors. Versatile the duplex will charge and discharge a wide variety of battery chemistries such as lipo, liion, life, nimh, nicd and pb. Simple the simple and ...
Ac input dc input cooling fan balance ports output 1 output 2 buttons connection diagram stop enter status battery type decrease increase start press this button to make selections in the main menu, to return to the main menu and to stop the current process. The reduce and increase buttons are used ...
Warnings and safety notes discharging pb batteries load memory these warnings and safety notes are particularly important. For maximum safety, please follow these instructions. Failure to follow these instructions may cause damage to the battery or charger and at worst it may cause a fire. Never lea...
Have you selected the appropriate program suitable for the type of battery you are charging? Did you set up the correct current for charging or discharging? Have you checked the battery voltage? Lithium battery packs can be wired in parallel and in series, i.E. A 2 cell pack can be 3.7v (in parallel...
Discharging: the main purpose of discharging is to clear the battery’s residual capacity, or to reduce the battery's voltage to a defined level. The same attention should be paid to the discharging process as charging.The final discharge voltage should be set up correctly to avoid deep-discharging. ...
The duplex charger is set to the default user settings when it is connected to a power source for the first time. The screen displays the following information in sequence and the user can change the parameters on each screen. If you need to alter the values in any program, press the ‘enter/start’ k...
The screen shows the nominal voltage of a lithium battery.The duplex is capable of charging: life (3.3v), liio (3.6v) and lipo (3.7v). This information is of critical importance, so you must check the battery carefully to ensure that it is set up correctly. If it is different from correct value, a f...
