Thank you for purchasing your remote dialing / answering big button phone from radioshack. Combining a speakerphone and a caller id unit in one system, your phone can display available call information. This telephone is hearing aid compatible. 43-208 remote dialing / answering big button phone www....
Contents important safety instructions .....................................................3 controls .....................................................................................4 preparing your phone ................................................................6 mounting the phone .......
Contents important safety instructions follow basic safety precautions when using your telephone to reduce the risk of fire, electric shock, and injury to persons: • plug the adapter into an outlet that is easily accessible and near the equipment. • to avoid injury, do not connect the provided power...
Up/down scroll up or down to select option. Sos hold down to activate or deactivate emergency call. Mi & m2 store 2 numbers and dial with one touch of a button. Menu to select options. Phone/cid switch between phone book and caller id when in standby mode. Flash press to produce a switchhook signal ...
Ringer lo mid hi set the ringer volume: lo/mid/hi. ToneÐ slide to adjust the tone volume for the handset when booster is activated. VolumeÐ slide to adjust the speaker volume. Hold down to activate or deactivate emergency call. L d lights when the red button is pressed. You can also press the red bu...
Preparing your phone 1. Peel the plastic label from your phone’s display before using your phone. 2. Connect the supplied ac adapter to the dc 9v 200ma jack and a standard ac outlet. 3. Plug one end of the supplied modular cord into the tel. Llne jack (rj11) on the back of the phone. Plug the other ...
Installing batteries in the phone (optional) insert 4 aa alkaline batteries (not supplied) in the battery compartment with correct polarities. When $ appears or the display dims, replace the batteries. In the pendant your pendant comes with one 12v a23 battery, when the l d on the pendant dims, repl...
Setting your phone after your phone is powered on, system information appears in the display. 1. Press menu. Lcd contrast appears in the display. Press call back/ ok to display the current level, then press up/down to select one of five settings. Press call back/ok to confirm and go to time and date...
2. To pair your pendant to your phone, select pairing, press call back/ ok on the phone, pairing... Appears, press the red button on the pendant. If the pendant is successfully paired, paired appears, if not, paired failure would appear. 3. To cancel, select delete? And press call back/ok to confirm...
10 call back from the caller id memory press phone/cid repeatedly until clip appears, pick up the handset, press up or down to select the desired number, then press call back/ok. Ifthecalleridnumberis10digits,press call back/ok once,1will addedbeforethecalleridnumberautomatically.Press upordown tose...
11 long distance numbers. Press call back/ok. Then enter the name and press call back/ok. Press up or down to select emergency on/off, press call back/ok again to save if select off. If you select emergency on, press up or down to select a location, then press call back/ok. 4. The number and name re...
1 to dial a number stored in the phonebook: • repeatedly press phone/cid until appears, then press up or down to find the number, press call back/ok. • pick up the phone, find the desired number and then press call back/ ok to call the number. Forquicksearch,enterthefirstletterofthename,thenpress up...
1 cautions • to ensure proper operation, this equipment must be installed according to the enclosed installation instructions. To verify that the equipment is operating properly and can successfully report an alarm, this equipment must be tested immediately after installation, and periodically there...
1 rf emissions information this equipment complies with part 68 of the fcc rules and the requirements adopted by the acta. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format us: aaa q##txxxx. If requested, this number must be provide...
1 a complaint with the fcc. Also, the phone company can make changes to its lines, equipment, operations, or procedures that could affect the operation of this phone. The telephone company notifies you of these changes in advance, so you can take the necessary steps to prevent interruption of your t...
Limited one-year warranty this product is warranted by radioshack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from radioshack company-owned stores and authorized radioshack franchisees and dealers. For complete warranty detail...
