Radio Shack 43-208 User Manual - Setting Your Phone
Setting Your Phone
After your phone is powered on, system information appears in the display.
1. Press
MENU. LCD CONTRAST appears in the display. Press CALL BACK/
OK to display the current level, then press UP/DOWN to select one of five
settings. Press
CALL BACK/OK to confirm and go to time and date setting.
TIME/DATE appears.
2. Press
CALL BACK/OK to display the time, then press UP/DOWN to set
the time, month and date. Press
CALL BACK/OK to confirm. LANGUAGE
appears.
3. Press
CALL BACK/OK to display the current language, then press UP/
DOWN to select the desired language. Press CALL BACK/OK to confirm
and go to voice setting.
VOICE appears.
4. Press
CALL BACK/OK to display the language, then press UP/DOWN
to select the desired language or
VOICE OFF. Press CALL BACK/OK to
confirm.
5. Repeatedly press
MENU until FLASH appears, press CALL BACK/OK to
display the current setting, then press
UP/DOWN to select flash time. Press
CALL BACK/OK to confirm and go to tone/pulse setting.
6.
TONE/PULSE appears, press CALL BACK/OK to display the current
setting, then press
UP/DOWN to select tone or pulse setting. Press CALL
BACK/OK to confirm.
• Ifyoudonotpressabuttonwithin20seconds,thephonereturns
tothestandbymode,orpress
PHONE/CIDtoreturntostandby
mode.
• ThedefaultsettingforvoiceisEnglish,ifyouselectother
languages,thephonewillannouncethephonenumber,digitsand
phone/CIDonly.
Setting the Remote Pendant
The phone comes with one remote pendant for emergency, you can pair up to
5 pendants to your phone,
FULL appears if you pair the 6th pendant. To pair
the pendant to your phone:
1. Repeatedly press
MENU until REMOTE PENDANT appears, press CALL
BACK/OK, press UP/DOWN to pair (PAIRING appears) or cancel pairing
(
DELETE? appears) your pendant.
NOT S