Radio Shack ITZA 2 Owner's Manual - page 9
9
Programming the Controller
ton, letting you automatically make complicated moves by sim-
ply pressing the button during a game.
Notes:
• Although you can store combination moves in the control-
ler, the game you are playing must allow combination
moves for you to use them.
• Since some complicated moves depend on
hold down time
(the amount of time a button remains active after you press
it),
space
(idle time between steps), and
hold time
(the
amount of time a button is held down) to work properly, you
might not be able to use these steps to program some
types of move series into the controller. See “Advanced
Programming” on Page 14 for more information about pro-
gramming space and hold information into a series of
moves.
• You can program a single button with the functions of up to
14 fire buttons, and program more than one button with the
functions of up to 15 fire buttons. If you program more than
one button, you can program the functions of additional fire
buttons into one of the buttons. This means that if you pro-
gram two buttons, one of the buttons can have up to 10 fire
buttons, while the other can have no more than 5 fire but-
tons.
Follow these steps to program moves into a button.
1. Hold down
PROGRAM
until the controller beeps twice and
the PROGRAM indicator flashes.
2. Hold down the button you want to program until the control-
ler beeps and the PROGRAM indicator lights steadily.