This manual is available for free compliments of buymebuyme.Com to order this product, please call toll-free 1-877-992-8963 or visit www.Buymebuyme.Com.
1 contents features .................................................................................................................................. 2 read this before installation ........................................................................................... 2 the fcc wants you to kn...
Owner’s manual please read before using this equipment. 2 line phone.
2 features features your radioshack 2 line phone lets you make or receive calls on two separate tele- phone lines using the headset, handset or the built in speakerphone. Line status indicators — let you see at a glance if a line is available, in use, or on hold. Data port — lets you connect to a co...
3 a quick look at your phone a quick look at your phone data tone pulse l2 ringer hi/lo/off handset vol hi/lo headset m1– m10 mute conference volume volume spkphone/ headset hold line 1 line 2 handset cord jack lower store flash redial/ pause handset l1 ringer hi/lo/off.
4 installation installation using ac power you can power the phone using the supplied 9v, 300ma ac adapter. Cautions: you must use a class 2 power source that supplies 9v dc and delivers at least 300ma. Its center tip must be set to positive and its plug must fit the phone's dc 9v 300ma jack. The su...
5 installation mounting the phone you can place the telephone on a desk or ta- ble, or mount it on a standard wall plate or di- rectly on a wall. Choose a location that is near an ac outlet and a modular telephone line jack, and out of the way of normal activi- ties. On a desktop use the supplied mo...
6 preparation preparation connecting the handset plug one end of the supplied coiled cord into the modular jack on the left side of the phone, and plug the other end into the modu- lar jack on the handset. Then place the hand- set on the cradle. Setting the ringer volume to indicate which line has a...
7 operation operation making and answering calls press the line button to select a line. The system will automatically use the speaker- phone. Then dial the number. The phone has automatic line selection. To dial your number directly without pressing the line button, pick up the handset, or press sp...
8 operation to switch from headset to speakerphone, just unplug the headset from the phone. Using mute to temporarily disconnect the speaker- phone, handset, or headset without ending the call, so you can talk privately with some- one in the room, press mute . The mute in- dicator lights. To resume ...
9 operation • to store an upper memory location, simply press a memory location but- ton (m1–m10). • to store a lower memory location, press lower , then press a memory location button (m1–m10). 5. Hang up the handset or press spk- phone/headset again. Note: to keep a record of each stored number, u...
10 operation transferring a call during a conversation you can transfer a call from one phone to an- other parallel phone during your conversa- tion. 1. Press hold to place the call on hold. 2. Hang up the handset. 3. Pick up the handset on the parallel phone. The line is automatically released. Not...
11 troubleshooting troubleshooting we do not expect you have any problems with your two line phone, but if you do, these suggestions might help. If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its instal- lation. If you ...
43-1753 lib787yy 04a01 printed in china radioshack corporation fort worth, texas 76102 limited one-year warranty this product is warranted by radioshack against manufacturing defects in material and workman- ship under normal use for one (1) year from the date of purchase from radioshack company-own...
