Radio Shack ITZA 2 Owner's Manual - Operation
7
Operation
Operation
MAKING AND
ANSWERING CALLS
Press the line button to select a line. The
system will automatically use the speaker-
phone. Then dial the number.
The phone has automatic line selection. To
dial your number directly without pressing
the line button, pick up the handset, or press
SPKPHONE/HEADSET
. To use a specific line,
press the button for that line.
When you receive a call, that line’s indicator
flashes rapidly until ringing is stopped. To
answer the call, press the corresponding line
button (
LINE 1
or
LINE 2
), lift the handset, or
press
SPKPHONE/HEADSET
.
To end a call, hang up the handset or press
SPKPHONE/HEADSET
.
Note: The speakerphone only operates with
AC power.
ADJUSTING THE HANDSET/
HEADSET/SPEAKER
VOLUME
To adjust the handset/headset volume, set
HANDSET VOL
to
HI
or
LO
.
To adjust the speakerphone volume, listen to
the dial tone while the speakerphone is in
use. Then press
VOLUME
or
VOLUME
to set the desired volume.
SWITCHING BETWEEN THE
HANDSET AND THE
SPEAKERPHONE
To switch from the handset to the speaker-
phone, press
SPKPHONE/HEADSET
, then re-
turn the handset to the cradle.
To switch from the speakerphone to the
handset, just lift the handset.
To switch from the speakerphone to the
handset during redialing or memory dialing,
let the number dial completely, then lift the
handset.
To switch from the handset to the speaker-
phone during redialing or memory dialing, let
the number dial completely, then press
SPK-
PHONE/HEADSET
and return the handset to
the cradle.
USING A HEADSET
For hands-free calling, you can connect an
optional headset to the telephone. Contact
your local RadioShack store for a suitable
headset.
Note: If the headset is connected and there
is AC power, the phone automatically switch-
es to headset mode even if the handset is
lifted. When there is no AC power, the head-
set only works if the handset is picked up.
1. Insert the headset’s plug into the
HEAD-
SET
jack at the left side of the phone.
2. Press
SPKPHONE/HEADSET
instead of
lifting the handset to make or answer
calls. To override automatic line selec-
tion, press the desired
LINE
button
instead of pressing
SPKPHONE/HEAD-
SET
. You will be connected to that line
with the headset.
3. Press
SPKPHONE/HEADSET
again to
hang up.
To switch from the headset to handset, pick
up the handset and unplug the headset from
the phone to make or receive a call.