Rae QRAE 3 User Manual - Warnings
1
WARNINGS
This Manual must be carefully read by all individuals who have or will have the respon-
sibility of using, maintaining, or servicing this product. The product will perform as
designed only if it is used, maintained, and serviced in accordance with the manufac-
turer’s instructions. The user should understand how to set the correct parameters and
interpret the obtained results.
CAUTION!
Only use RAE Systems battery pack P/N G02-3004-000 (Li-ion, rechargeable)
Charge the instrument Li-ion battery using the appropriate RAE Systems charger
and only outside hazardous areas
Use of non-RAE Systems components will void the warranty and can
compromise the safe performance of this product
Warning: Substitution of components may impair intrinsic safety
SPECIAL CONDITIONS FOR SAFE USE
The PGM-25XX/D multi-gas monitor must be calibrated if it does not pass a
bump test, when a new sensor has been installed, or at least once every 180 days,
depending on use and sensor exposure to poisons and contaminants
No precautions against electrostatic discharge are necessary for portable
equipment that has an enclosure made of plastic, metal or a combination of the
two, except where a significant static-generating mechanism has been identified.
Activities such as placing the item on a belt, operating a keypad or cleaning with a
damp cloth, do not present a significant electrostatic risk. However, where a
static-generating mechanism is identified, such as repeated brushing against
clothing, then suitable precautions shall be taken, e.g., the use of anti-static
footwear.
Note:
Users are recommended to refer to ISA -RP12.13, Part II-1987 for general
information on installation, operation, and maintenance of combustible gas detection
instruments.
WARNINGS
ONLY THE COMBUSTIBLE GAS DETECTION PORTION OF THIS
INSTRUMENT HAS BEEN ASSESSED FOR PERFORMANCE.
UNIQUMENT, LA PORTION POUR DÉTECTOR LES GAZ COMBUSTIBLES
DE CET INSTRUMENT A ÉTÉ ÉVALUÉE.