Rainforest Automation EMU-2 Quick Start Manual - Easy Steps:
START VIEWING YOUR REAL-TIME
ENERGY INFORMATION IN FOUR
EASY STEPS:
STEP 1: REGISTER WITH YOUR UTILITY
You will need to provide your MAC Address and Install Code from
the Information Label on the back of your EMU-2
™. It may take
some time for your utility to enable your meter to connect to your
device. It is important to wait until this is complete before
proceeding to the next step.
STEP 2: PLUG IN YOUR EMU-2™
Plug the AC Adapter into a power outlet,
and plug the other end of the cord into
your EMU-2
™.
STEP 3: WAIT FOR EMU-2™ TO JOIN THE METER
Once powered up, the unit will attempt to connect to the meter.
You will initially see dashes on the screen. The EMU-2
™ is ready
to use once the Current Time screen appears with the time and
date displayed
SEE THE FULL EMU-2™ USER GUIDE ON OUR WEBSITE:
rainforestautomation.com/emu2_support
Batteries may also be used as a source
of short-term alternative power, but the
batteries are not intended to be the primary source of power,
and may only last a few days of continuous use. If using battery
power, ensure that only alkaline batteries are used.
Note that batteries do not recharge when the unit is plugged in.
Also note that putting a battery in backwards can be hazardous,
and may cause extensive damage to your EMU-
2™.
3:25 pm
Jun 3, 2011
STEP 4: CONFIGURE YOUR EMU-2™
● Press both of the buttons simultaneously and release.
● Press the Bottom Button to skip the Restart screen.
● Press the Top Button to select the language you would like
to use; press the Bottom Button to save your selection.
● Set your electricity price. The digit to be modified will be
flashing, starting on the right, and working left. After you
have entered all 5 digits of the energy price, you will see the
Time Options screen.
● You may need to set the time zone (ask your utility). When
done, press the Bottom Button to go to the Power Source
screen.
● Press any button to return to the Current Time screen.
Your EMU-2
™ is ready to use.
Meter Reading
Current Usage
Daily Totals
Total to Date
Previous Totals
Current Time
Current Price
Message
Restart
Select Language
Set Rate
Time Options
Power Source
Screen Navigation
both
buttons