Rainforest EMU User Manual - Emu
www.rainforestautomation.com
EMU
™
User Manual
11
for a good signal; fewer bars indicate a lower quality signal. If the connection to the
smart meter is lost, a
large “X” will replace the bar graph.
There are also a number of configuration screens. These are accessed by pressing
and releasing both buttons simultaneously to put your EMU
™ into Configuration Mode.
Note that your EMU
™ should have successfully connected to the smart meter before
putting it into Configuration Mode.
There are Indicator LED Lights that show pricing status from your utility. These lights
flash in different sequences to alert you of the current pricing condition.
LED Light
Flash Sequence
Descriptions
Green LED
1 flash every 60 seconds
Price is normal
Yellow LED
1 flash every 10 seconds
Price increased; consider reducing usage
Red LED
1 flash every 5 seconds
Price is high; requested to reduce power usage
Red LED
2 flashes every 3 seconds
Price is critically high
Table 1: LED Flash Indications
If none of the Indicator LED Lights are flashing, this indicates that no price has been set,
either by the meter, or manually. The Indicator LED Lights also flash in a special red-
yellow sequence (which replaces the price sequence) when there is a new text
message waiting to be read.