Rainfresh 30T Installation And Operation Manual - page 10
10
To order replacement parts, call 1800 667 8072 Monday to Friday 8:30 AM to 5 PM EST.
Limited Warranty:
This “T” Series Softener System is warranted to the original Consumer purchaser for a period of one (1) year, from the date of purchase, against defects in
materials or workmanship. The electronic controls and mineral tank are warranted for 5 and 10 years respectively against defects in materials or workmanship.
The company's obligation under this warranty shall consist of repair or replacement, at its option, of any part found by company inspection to be defective,
provided that the product has not been misused, abuse, altered or damaged by Consumer with respect to the original installation, as determined by the
company. This warranty will not apply if water passing through the System has a) Turbidity / Suspended Solids > 5 ppm (mg/l). b) Hydrogen Sulphide
concentrations greater than 0.05 ppm (0.05 mg/l). c) Iron concentration greater than 0.3 ppm (0.3 mg/l) or Manganese greater than 0.05 ppm (0.05 mg/l), f)
Tannins or colour. This limited Warranty applies only to a unit when returned to the Warrantor at the owner’s expense and in accordance with shipping
instructions received from the Warrantor. This warranty does NOT cover, and is intended to exclude, any liability on the part of Envirogard for any incidental
damages, consequential damages, labour charges or any other costs incurred in connection with the purchase, installation, use, maintenance or repair of the
system whether under this warranty or any other warranty implied by law. Some provinces/states do not allow the exclusion of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary
from province/state to province/state. This warranty applies only to water filter/systems purchased in Canada or the U.S.A.
Envirogard Products Limited
446 Major Mackenzie Drive East
Richmond Hill, ON L4C 1J2, Canada
Helpline: 1800 667 8072
Web: www.rainfresh.ca
PARTS LIST
PART #
DESCRIPTION
1
Control Valve
2
Top Distributor
3
Central Tube (Riser)
4
Media Tank for model 30T – 9”x 48”
Media Tank for model 45T – 10”x 54”
Media Tank for model 60T– 12”x 52”
5
Softener Resin
6
Safety Brine Valve
6A
Brine Tank (salt tank)
7
Brine Well
8
Bottom Distributor
9
Injector & screen assembly
10
Inlet/Outlet Fitting - elbow (90°) – ¾”
11
Locking Clip for inlet/outlet
12
Bypass valve assembly
13
Locking clip for bypass valve
14
Bypass valve metal clips and screw set
15
Drain fitting (Elbow)
16
Brine elbow fitting 3/8 stem x 3/8 QC
17
AC Power Adapter
J
a
n
2
0
1
3
9
10
11
12
13
14
15
16
17
1
2
3
4
5
6
7
8
6A