RAMSET T2 Instruction Manual - Fuel Cells And Batteries
Fuel Cells and Batteries
Fuel Cells
• Thefuelcellmustbeusedat
temperatures between -5° C
(23° F) and 49° C (120° F).
• Atthebeginningofeachfastening
cycle, a measured amount of gas
is injected into the combustion
chamber.
• Thefuelcellisdesignedwithan
internal reservoir that is under
pressure by a propellant.
• Whenthefuelcellisempty,a
small amount of propellant
remains inside the cell.
• Forsafetyandpropertoolfunctioning
it is important that only Ramset
supplied fuel cells be used in the
T2 tool.
Batteries
• Thebatterywillbecomedischarged
even if the tool is not being used.
• Removethebatteryfromthetool
when the tool is not to be used or
put it in the no contact position
in the tool as shown on page 6.
• Rechargethebatteryifithasnot
been used for a long period of time.
• Batteriesaresuppliedinan
uncharged condition so fully
charge them for first time use.
• Donotrechargebatteriesuntil
they are fully discharged.
• Ittakesabout1hourtorecharge
a battery.
• Useonlybatteriesandchargers
supplied by Ramset.
• BatteryCapacity—Maximum
1200 shots.
DANGER
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
DANGER
5
Ramset Fuel Cell
Ramset 6 V. Battery