Rangemaster Classic 110 Installation And User Manual - page 13

13

To set the correct time of day.

See the ‘2 Minute Tour’ at the beginning of this

guide.

To time something that’s cooking

(minute minder)

Press and hold as above. At the same time press

(-) or (+) until the time you want to cook for is

shown, as below.

You can check time remaining by pressing 

and cancel the beeper by pressing 

To stop automatically

Use when you have started the oven manually.

Press and hold as above. At the same time press

(-) or (+) until your required ‘Stop Time’ shows.

AUTO will show in the display. When your

cooking is finished the beeper sounds. TURN

THE OVEN KNOB TO 0 FIRST, then press 

once to stop the beep, press   again to return to

manual cooking.

The clock

To start and stop the oven automatically

Before you set the clock, you must have two

numbers clearly in mind.

The ‘cook period’, which is the period of time

you want the oven to cook.

The ‘stop time’, which is the time of day you

want the oven to stop cooking.

You cannot set a start time directly - this is set

automatically by setting the cooking period and

stop time.

Press and hold as above. At the same time

press (-) or (+) until your required ‘cook period’

shows.

Then press and hold as above. At the same

time press (-) or (+) until your required ‘stop

time’ shows.

AUTO will show in the display.

Set the oven to the required temperature.

When your cooking is finished the beeper

sounds. TURN THE OVEN KNOB TO 0 FIRST,

then press 

 once to stop the beep, press 

again to return to manual cooking.

If you are out, don’t worry about the beeper

going off, it stops after a while. When you

return, TURN THE OVEN KNOB TO 0 FIRST,

then press 

 twice, to return to manual

cooking.

AUTO is showing, you want to reset to

manual cooking.

When cancelling an automatic setting, any

cooking time already set must be returned to

0.00 before you can return to manual, by

pressing the 

 button.