Rapid 2005 Installation, operation & service manual - page 42
B-S
ERIES
I
NSTALLATION
, O
PERATION
AND
S
ERVICE
M
ANUAL
32 of 147
Step 11.2.3
Step 11.2.4
Attach channels to end plate. Make
s
u
re top channel is facing do
w
n and
bottom channels are facing
u
p.
NOTE:
Channels "open" to the
inside of the filter box.
Description
Part Number
Channels
77404.002
TEK scre
w
13404
Stiffener
Header Panel
Attach header in bet
w
een the lo
w
er
portion of the left and right side
panels.
Attach stiffener in bet
w
een top
portion of left and right side panels.
Attach loose end of
u
pper filter
channel to stiffener; attach loose
end of lo
w
er filter channels to
header piece.
On the inlet of the filter section,
ri
v
n
u
ts (P/N 91120106) are factory
installed. With additional 3/8"
hard
w
are (P/N 20515 and
P/N 20517) the filter section can be
installed on the inlet of the
u
for additional
information on filter section
installation.
NOTE:
For easier installation, the
filter section may be mo
u
nted to the
air handler at this point, prior to the
addition of filters and access door.
Refer to
for
installation instr
u
ctions.
Description
Part Number
Header Panel
77402.002[W]
Stiffner
77407.002[W]
TEK scre
w
13404