Raptor RAPPACT3110 Installation Instructions Manual - page 6
DElIvERED ITEMs
Carefullyremovetheweldingunitfromitspackagingandcheckthatyouhavethefollowingitems:
•
Weldingunit
•
Weldingcable
•
USBflashmemorydrive
•
Barcodepenreader
Whenpartsaremissingordamaged,pleasecontactyourdealer.
ThisweldingunitisClass1andrequiresanearthed(grounded)connection.Anearthspikemustbeusedwithgenerators.
Thisunitissuppliedineither110voltor230voltoperation.Checktheratingplateonthesideoftheunitforthecorrectsupplyvoltage.
Thepowersourcemustbecapableofproviding3500Watts.
ElECTRICAl sAFETY
ExtensioncablesshouldonlybeusediftheycomplywiththeHO7RNFharmonizedstandard.TheymustbefittedwithconnectorstotheBSEN
60309-2standard.Allcablesmustbeunwoundfromthereeltostopinductiveheatingeffects.Thecabledimensionsshouldbeasfollows:
110 Volt operation
230 Volt operations
Upto63mmdiameter
Upto63mmdiameter
2.5mm2cable=30m
1.5mm2cable=40m
Upto180mmdiameter
Upto180mmdiameter
2.5mm2cable=20m
1.5mm2cable=25m
Over180mmdiameter
Over180mmdiameter
4.0mm2cable=l0m
2.5mm2cable=20m
ItisrecommendedforincreasedelectricalsafetytouseaResidualCurrentDevice(RCD)withatrippingcurrentofnotmorethan30mA.
AlwayscheckyourRCDeverytimeyouuseit.
Thesupplycablemustbeinspectedforsignsofdamagebeforeeachuseandtheequipmentmayonlybeusedifinperfectcondition.
Damagedcablesmustbereplacedbyanapprovedserviceagent.
Thisequipmentisclassifiedas“Portableforuseonindustrialapplications”,andmustundergoaformalelectricalsafetycheck(Portable
ApplianceTest)asperlocalregulations.
WARnIng! switch off and remove the plug from the mains before adjusting,
cleaning or if the cable is cut, damaged or entangled.
4