Raritan Paragon Manager User Manual - page 13
C
HAPTER
2:
O
PERATION
7
4. The Security Groups field is automatically populated, based on the defaults of the Paragon unit to
which you are connected. To change the assigned Security Groups, click [Set Security Group] and
change the default groups (please consult your Paragon User Guide for more information on Security
Groups).
5. Click on the Allow Administrator Privileges drop-down arrow and select an option from the list.
6. In the User Options panel, click on the Scan Mode drop-down arrow and select the scan mode for this
user. Global scan mode, the default, scans each channel for the same amount of time (default time =
three seconds), and Individual scan mode scans each channel for a specified time you type in. To
change the number of seconds for either type of scan, type the new duration of seconds in the Scan
Time (Sec) field.
7. Click on the Hot Key drop-down arrow and select a key from the list. When you press this key twice
rapidly on any user station in your Paragon configuration, the Paragon Manager window will appear.
Note that this option is set in Paragon Manager, but is used anywhere in the Paragon system.
8. Click on the Previous Channel drop-down arrow and select a key from the list. When you press this
key on any user station in your Paragon configuration, the channel previously viewed will appear.
Choose None to override this capability. Note that this option is set in Paragon Manager, but is used
anywhere in the Paragon system.
9. Click on the Green Mode (min) drop-down arrow and turn Green Mode (Powersave mode) Off or On.
If you select On, type in the number of minutes after which, if there is no keyboard or mouse activity,
the user station monitor goes blank.
10. Click on the Help Display drop-down arrow to select how you want to view the Paragon help screen
when activated from any user station in your Paragon configuration. Help text can be active, scrolling
across your screen from right to left, or it can be displayed in a single line.
11. Click on the ID Display (sec) drop-down arrow to turn the ID display Off or On. If you select On, the
ID Display will remain on the user station monitor for the number of seconds you type into the next
field.
12. In the Menu Position and ID Display Position panels, enter the Horizontal and Vertical placement
of the menu on any of the user station monitors in your Paragon configuration.
13. Click [OK] when finished, or click [Cancel] to exit without adding a new user.
Delete a User
Deleting a user in the Paragon Manger window deletes the user account from the Paragon Manager screen
and from the currently connected Paragon system.
1. In the User panel, click on the user you want to delete.
2. On the Users menu, click Delete. A Confirm User Delete window appears.
3. Click [Yes] to delete the user or click [No] to close the window without deleting.
Note: The Admin user cannot be deleted.