Ratoc Systems CBU2 User Manual - page 11
Manual is about: USB2.0 CardBus Host PC Card
of
32
10
5. To verify that the driver is installed correctly, right-click on [My Computer], select
[Properties], and then select the [Hardware] tab. Then, click the [Device Manager]
button.
If you can find two [NEC PCI to USB Open Host Controller] strings and a [RATOC CB
USB Enhanced Host Controller] string under the [Universal Serial Bus controllers], the
driver is installed correctly.
6.
To connect a USB device, proceed to Chapter 4.Connecting a USB device.
To remove the CBU2 from the PC Card slot, proceed to Chapter 5.Removing the
CBU2.