Ratoc Systems CBU2 User Manual - A. When You Use Macos 9.X...

19

3-5. Confirming the driver(Macintosh)

The CBU2 doesn’t support USB2.0 High speed on Mac. The CBU2 works as the USB1.1 compatible

host adapter. Please confirm your Mac is ready to use the CBU2 by following the steps:

A. When you use MacOS 9.x...

               Open [Apple System Profiler] from the Apple menu and then click the [Devices and

Volumes]. If you can find a “USB” string as shown below, you can use the CBU2.

               To connect a USB device, proceed to Chapter 4.Connecting a USB device.

               To remove the CBU2 from the PC Card slot, proceed to Chapter 5.Removing the CBU2.

              If you can’t find the string, you need to install USB driver available through Apple web site.

              To install the USB driver through Apple web site, follow the steps:

1.

Access to Apple web site(www.apple.com) and click the [Support] tab. Then, click [Down-

loads] and type in [USB Adapter] at Search for Downloads box. Click the [Go] button.