Ratoc Systems Converter User Manual - page 22

18

3-2-2. Scanner device, Tape drive, CD/DVD burner, etc.

The other SCSI devices besides mass storage device should be recognized by

the system automatically, but they will not be mounted on the desktop. If the

SCSI device is a scanner, it will be recognized by scanning software. If the

device is a tape drive, it will be recognized by backup software. If the device is

a CD burner, it will be recognized by burner software.

(Note: Even if the device is recognized by the system, if the software doesn’t

support firewire interface or doesn’t support the device itself, the device will

not work.)

On Mac OS X, we currently recommend following softwares

For Scanner: VueScan (Hamrick Software)

For Tape drive: Retrospect 5 or above(EMC Dantz), BRU(TOLIS Group)

For CD burner: Toast 5 or above(Roxio)

If the software which comes with the SCSI device doesn’t work, try other

software, too. Because the software which comes with the SCSI device may

support only SCSI interface.

If the SCSI device is not recognized by the software, refer to Chapter 4.