Ratoc Systems Converter User Manual - Then  Fr Configuration.

26

You can change configuration settings on the FR1SX for the SCSI device.

1. From the Start button, select Programs, RATOC FireWire Utility, and

then  FR Configuration.

2. If the message box says “reconnect the 1394 cable”, unplug the firewire cable

from the FR1SX or the computer and wait a few seconds. If the FR1SX is not

connected, the message says “Can't find FireREX1/FR1SX. connect FireRex1/

FR1SX now”. Then connect the firewire cable to the FR1SX or the computer

and click OK.