Ratoc Systems Converter User Manual - 2.Installation
Manual is about: Microtek User's Guide Converter
of
65
5
2.Installation
Follow the steps through to connect the FR1SX to a SCSI device
2-1.Connecting the FR1SX to a SCSI device
1. Make sure if the SCSI device is turned OFF before connecting the
FR1SX. Connect the FR1SX to a SCSI device, as Fig.3 shows. If the SCSI
connector is different, you can use an optional adapter. Regarding optional
adapters, refer to Chapter 8.
Terminator