Raven AccuBoom Installation Manual - Components
Manual # 016-0171-014
1
C
H A P T E R
I
N T R O D U C T I O N
Congratulations on your purchase of the Raven AccuBoom system! This
system is designed to provide worry free turn-on and turn-off of your
booms with respect to the as-applied coverage map. The following
instructions are designed to assist you in the proper installation of the
AccuBoom system. See the Viper Installation and Operators Manual for
instructions on setting up the software and using the AccuBoom system.
You will also need a valid AccuBoom Control Activation Key for your
Viper system in order to activate the AccuBoom system.
Components
Needed
• GVM Predator and Prowler CAN AccuBoom Kit - P/N 117-1001-014
Kit includes:
• CAN AccuBoom Control Node - P/N 063-0172-316
• Cable, CAN AccuBoom GVM Prowler/Predator - P/N 115-0171-591
• CAN Tee Cable, 12 foot - P/N 115-0171-362
• AccuBoom Control Activation Key - P/N 077-0180-010
• GVM Predator and Prowler CAN Installation Manual - P/N 016-0171-014
Important!
All boom switches must remain in
the
ON
position while AccuBoom control is in
operation!