Rayburn Heatranger 480CD User Instructions - page 8
1. Ensure that the AUTO mode is being used when
setting the programmer.
2. Press the SET button twice.
3. The display should alternate between ON1 and the
time of day currently set.
4. Adjust to the time required by using + or - buttons to
set time you wish cooker to turn on (e.g. morning).
5. Press SET once to confirm time.
1. The display should alternate between OFF1 and the
time of day currently set.
2. Adjust using + or - to set the time the cooker is to
turn off.
3. Press SET once to confirm.
1. The display should alternate between ON2 and the
time of day currently set.
2. Adjust using + or - to set the time the second event is
to begin (evening).
3. Press SET once to confirm.
4. If the second event is not required, set the time to
00:00 and then press SET.
1. The display should alternate between OFF2 and the
time of day currently set.
2. Adjust using + or - to set the time the second event is
to end.
3. Press SET once to confirm.
4. Again, if this is not required set the time to 00:00 and
then press SET.
1. To repeat the first event of the previous day, press
the REPEAT button once.
2. To repeat the second event of the previous day, press
the REPEAT button once.
3. Alternatively, to set different times from the previous
day, alter the required time.
8
SETTING THE PROGRAMMER - WEEKLY (1)
SETTING THE PROGRAMMER - WEEKLY (2)
REPEATING DAYS
Fig. 4
DESN 514716
Fig. 5
DESN 514717
Fig. 6
DESN 514718
DESN 514719
Fig. 7
Fig. 8
DESN 514719
DESN 514720
SECOND EVENT
SECOND EVENT