Rayburn Heatranger 480CD User Instructions - page 9
1. To set individual days, press SET once.
2. Adjust to the day required using + or - buttons.
3. Press SET to confirm the day chosen.
4. Adjust to the new times required as before.
5. Again, if an event is not needed set to 00:00.
6. Once day is set (both events), display should default to
time of day.
1. Press the TIMER button once.
2. 00:00 should be displayed.
3. Adjust to the time required using + or - buttons.
4. Press TIMER to confirm.
5. Press TIMER to show the time of day. To check the
remaining time on the minute minder, press TIMER
once then press TIMER again to show the time of day.
Once the timer has finished, it will flash 00:00 and a
buzzer will sound. To stop press TIMER.
To return to MANUAL mode at any time whilst
programming, press the AUTO/MAN button and the time
of day will be displayed.
9
SETTING THE PROGRAMMER - DAILY
SETTING THE MINUTE MINDER
Fig. 9
DESN 514721
Fig. 10
DESN 514722