Raymar RT20 Series Quick Start Manual - page 12
of
15
5: Configuring the RT20xx for 3G/4G access
© Raymar 2013
Raymar Raymar RT20xx Series Quick Start Guide
Issue 1.2
Page 12 of 15
Figure 5: The common connectivity page
6. Ensure the General Setup tab is selected.
7. For single SIM implementation, in the SIM drop down menu, select SIM 1.
8. Enter the APN information and the PAP/CHAP username and password.
9. Click Save & Apply.
10. To enable 3G/4G connection to connect on boot up, select the Advanced Settings
tab.
11. Select Bring up on boot.
12. Click Save & Apply.
13. To check for connectivity, return to the top menu, and under Network ->
Interfaces, the WAN interface will show receive and transmit packets and an IP
address.