Quick start guide for race master.
Quick start guide for race master www.Raymarine.Com notice: for full user documentation for the micronet family and for other useful infomation please refer to the cd-rom supplied with your product, or to the raymarine website at www.Raymarine.Com..
Display features switching on and off to switch your race master on or off, press for two seconds standalone operation (see page 4 for networked mode) top pane heading is permanently displayed in the top pane. Bottom pane there are three functions ; scrolls through the functions. Race timer (tmr), a...
Quick start guide for race master 2 www.Raymarine.Com backlighting to adjust the display backlighting press and hold ,. Then use and to select from off, or levels 1,2,3. Keylock keylock can be enabled in setup to protect from accidental key presses. When keylock is enabled, pressing a key causes the...
Before the race 3 www.Raymarine.Com set the start timer go to the race timer (tmr) page. Press for 1 second, the last countdown value is shown, flashing. If required adjust the countdown value using and . Press to exit edit mode and prepare for countdown. At the first "gun" press to start the countd...
Quick start guide for race master 4 www.Raymarine.Com sail close hauled on either tack. If on starboard tack, press . If on port tack tack, press . The new mean wind direction (mwd) is captured. The mean wind direction (mwd) pop-up is displayed. If required, the value can be adjusted using and .. Sa...
Networked node operation 5 www.Raymarine.Com display modes you can select from several display modes in setup, the most commonly used modes are: heading mode (default): the top pane of the display always shows the boat's heading and the heading pages is removed from the bottom pane rollover. The bar...
Depth depth is indicated using a fixed scale 0 to 20m with zero at the bottom of the graph. Each segment of the graph corresponds to 1m of depth. The bar graph always indicates depth in metres, even if other depth units are chosen for the digital display. Speed trim speed trim is indicated using a d...
Www.Raymarine.Com.
Uu0 8 0 - r e v 0 4.
